just put the IP in netconf using the Physical PPA lan port (like normal), then when APA starts, it will bind it to the APA port
INTERFACE_NAME[1]=lan0:1
IP_ADDRESS[1]=1.2.3.4
SUBNET_MASK[1]=255.0.0.0
INTERFACE_STATE[1]=up
if adding a secondary IP once APA is already running: bind it to the APA PPA (lan900) as follows:
ifconfig lan900:1 1.2.3.4 255.0.0.0 up
Subscribe to:
Post Comments (Atom)
1 comment:
This is the right webpage for anyone who would like to find out about this topic. You realize so much its almost tough to argue with you (not that I actually will need to…HaHa). You certainly put a fresh spin on a topic which has been written about for many years. Wonderful stuff, just great!
Post a Comment